Brief notes on Speed and Power of Mariner Outboard Motors

Due to the rising number of boat enthusiasts, the demand for mariner outboard motors is increasing these days. For quite some years American manufacturers like Chrysler, Mercury, and Johnson dominated this industry; until Honda and Suzuki came into the picture. Today, the fierce competitor in this segment has resulted in new technologies being introduced rapidly.

You will see that there are multiple options available when you start looking for outboard motors. You have to acknowledge the fact that your boat will not get far without the use of these motors.

Some people tend to opt for used outboard engines. However, buying a new one is always a safe bet. No doubt that you will be able to get a good bargain on the used outboard motor engines, however, there is a risk factor involved in it. You will be paying more initially to buy brand new mariner outboard motors but then at least you know that it is coming with a guarantee or a warranty.



Needless to say, comparison shopping is just before you go for them. If you do not do it then it might be very much possible that you end up paying more for the marine outboard motor. Even the same products vary greatly between retailers and dealers. Another advantage of using new outboard engines is that they will give you confidence in the waterways.

You also need to break your engine properly, as it is very important to ensure a long engine life. If you get it wrong then it may cause damage to the bearings, piston rings, crankshafts, etc. The bearing and grease can also be burred and chipped. You need to follow the guidelines given by your manufacturer. There is a certain minimum fuel requirement that you need to follow. Sometimes blending or octane requirements are not matched leading to shorter engine life. The different grades of the engine oil affect the efficiency of carbon buildup on the rings as well as the piston. Thus, you need to take care of these simple things to ensure the smooth running of the engines.

Mariner outboard engines should not be kept ideal for longer durations. Also, you need not race the engine at full speed. The cooling water should be well circulated. Ideally, the speed should also be varied every 15-20 minutes. Different companies are trying to achieve domination by improving reliability and efficiency.

Mariner outboard motors are mainly a product of Mercury Marine. These steering and propulsion systems for boats consist of an engine, gearbox, and propeller or jet drive. Mercury provides engines for private as well as commercial use. The engines focus more on the power rather than fuel efficacy. The mariner outboard size ranges from 2.5 to 350 HP. The company has got a wide range of products with them and you will surely find the one which you are looking for.

Comments

Post a Comment

Popular posts from this blog

How to buy used outboard motors

Image
Used Outboards - Are you looking at buying a used outboard motor? If you are looking at buying a used outboard you should consider all of the options available to you. Some questions you should be asking firstly yourself like what the outboard motor is used for, how many hours, how much I can spend on maintenance work, etc. Each outboard motor manufacturer produces a very different outboard from the last. Some of these outboards suit different applications. For example, if you are looking at doing a lot of trolling, then you could consider a four-stroke outboard. The issue with most two-stroke outboards is if you do a lot of trolling and idling, they can be very Smokey and have the issue of fouling spark plugs. If you are doing large hours with your outboard motor, then you will want an efficient outboard motor. A four-stroke outboard or a direct-injected two stroke, like a Mercury Optimax, Evinrude Etec, or Yamaha HPDI. When buying used outboards the cost is a huge factor. You n
Read more

Rebuilt Powerhead – An inexpensive option than buying a new outboard powerhead

Image
Outboard is consists of three major sections which are a powerhead, the midsection, and the lower unit. Powerhead is the head part of an outboard engine and a collection of all the main parts that make up the combustion unit such as blocks, piston, heads, valves, fuel tank, speed control lever and some more. All these parts and other sections together form an engine that helps to move the boat forward in the water.  Powerheads are produced that last for long years. But constant working and salt water contact to the parts in the outboard unit can make in degrade the parts and also the working efficiency of the powerhead. And buying a new powerhead or outboard engine can take your money then you expected. But there is an option of renewing the old and workable outboard a second chance with the rebuilt powerhead service.  How to choose the Rebuilt Powerhead? Choosing a quality Rebuilt powerhead is a significant thing. The demand for Rebuilt powerhead is increasing day
Read more